| Product Name | 1200W 320L/H Water Electrolyzed Oxyhydrogen Flame Generator with 2 Gas Torch |
| Item NO. | PGJ-200A2L-1200W |
| Weight | 28 kg = 61.7294 lb = 987.6709 oz |
| Volume | 0.1 CBM |
| Category | Leaser Engrave > Auxiliary Machine |
| Creation Time | 2021-09-27 |
1200W 320L/H Water Electrolyzed Oxyhydrogen Flame Generator with 2 Gas Torch
PRODUCT NAME：
Water Electrolyzed Oxyhydrogen Flame Generator
Other Name：
Oxyhydrogen Gas Machine, Water Welding Machine,
SPECIALTY：
No-carbon oxyhydrogen flame, small flame with high temperature, safe and easy to use, reliable, no-pollution, low cost, etc.
PGJ-200A2L-1200W
|
POWER INPUT |
AC- 220+20V OR AC-110+10V 50-60HZ TOTAL POWER : <1200W |
|
VOLUME & G.W |
Sup-hard-greenpaper Package：L*W*H(58*34*51CM); G.W 28KG |
|
OXYHYDROGEN GAS MADE |
About 0-320L/hour controlled |
|
ELECTROLYTIC CELL |
Double cell body，3 +3 layers，anode used sup-rotproof meterial.Total Volume 4050ml. |
|
DIGITAL AMMTER |
If indicating 0-200A controolled ， Machine is making oxyhydrogen gas ，working well. |
|
PRESSURE AUTO-CO***OL |
Pressure High Than 0.15mpa Switch off；Low than 0.09mpa Switch on. |
|
GAS BAROMETER |
Low than 0.15mpa is right and safe, Oil inside for shockproof. |
|
TORCH & NOZZLES |
1-6Torches with Red copper nozzle A, B, C, D, & pinhole. Add 1 big nozzle 1.0mm. |
|
ELECTROLYTE（ALKALI）
|
Must to add electrolyte at the first time of use. 500g electrolyte-powder mixed 2500ml water in a ovenproof plastic container . Change electrolyte when dirty or losing efficacy. 2 offlets in the bottom for changing. |
|
CONSUMED FUEL |
Water. Only water，not add electrolyte again，When the water level is lower than M line, please stop machine for adding water to near high line. water consumption ：about 180ml/hour. need to add water about every 4 hours From best to ordinary are: distilled water，purified water，cold boiled water，controlled water. Clean water is ok，but not use mineral water. |
|
WORK ENVIRONMENT |
0-50°C, biggish room or well ventilated. |
No related record found